Flexible Filament

Discussion in 'Printing Materials' started by Loris Uzan, Apr 5, 2014.

  1. Loris Uzan

    Loris Uzan New Member

    Joined:
    Apr 5, 2014
    Messages:
    10
    Likes Received:
    0
    Hey guys I just wanted to know if you could load this filament http://store.makerbot.com/flexible-filament in the Deltaprintr. I am guessing it doesn't need a heated bed and I know the nozzle temp needs to be at a 120 degrees celsius.
     
  2. Shai

    Shai Master printer guru Deltaprintr Staff

    Joined:
    Dec 25, 2013
    Messages:
    1,305
    Likes Received:
    287
    Hey Loris,

    Never tried any of makerbot's filaments, but.. if it doesn't need a heated bed, then it may work. 120 degrees shouldn't be a problem. But keep in mind, we don't offer support or guarantee anything other than PLA since that is what the printer was originally designed for.

    Thanks,
    Shai
     
  3. bubbasanjohn

    bubbasanjohn New Member

    Joined:
    Nov 1, 2017
    Messages:
    4
    Likes Received:
    0
    TPU does not seem to work. Going to try and decrease print speed but this seems just to be a waste. Was all excited as the advertising on the site says ANY material will print. Hoping this is the case.
     
Loading...

Share This Page