Need a new thermistor.

Discussion in 'Need a part' started by Mark G, Apr 30, 2015.

  1. Shai

    Shai Master printer guru Deltaprintr Staff

    Joined:
    Dec 25, 2013
    Messages:
    1,266
    Likes Received:
    266
    The auto-calibration automatically accounts for blue painters tape. But if you still need to offset it even more, you can use G1 Z0 to home the printer to the bed and then manually move it via pronterface or for example send G1 Z0.05 to move it 0.05mm off the bed and save it with M500 command.
     
  2. JuergenHeckmann

    JuergenHeckmann New Member

    Joined:
    Mar 21, 2016
    Messages:
    19
    Likes Received:
    2
    Alright.
    @Shai: Can you give me some additional infos on my other question for the thermistor aswell ?
     
  3. Shai

    Shai Master printer guru Deltaprintr Staff

    Joined:
    Dec 25, 2013
    Messages:
    1,266
    Likes Received:
    266
    You would have to use the same thermistor as the one that comes with the Mini Hotend to ensure it fits and works correctly. The number is available on the product page.
     
Loading...

Share This Page