Simplify3D

Discussion in 'Software Usage' started by Gary, Feb 5, 2015.

  1. Gary

    Gary New Member

    Joined:
    Mar 11, 2014
    Messages:
    9
    Likes Received:
    5
    Are you working with Simplify to get a Deltaprintr profile built in?

    I don't doubt that Repetier and Cura work fine, I'd just like to use a common front end between my printers.
     
  2. Shai

    Shai Master printer guru Deltaprintr Staff

    Joined:
    Dec 25, 2013
    Messages:
    1,281
    Likes Received:
    272
    Not yet. Have to also give it a try first. If there is enough demand behind it, we will take a look at it. One thing at a time ;)
     
  3. Gary

    Gary New Member

    Joined:
    Mar 11, 2014
    Messages:
    9
    Likes Received:
    5
    Ok. Well, presumably I should be able to enter a profile. If I get that figured out I'll let you know.
     
    Shai likes this.
  4. Special-K

    Special-K New Member

    Joined:
    Apr 2, 2014
    Messages:
    5
    Likes Received:
    2
    Here's a profile that I've put together for Simplify3D, if you don't already have one.

    I've printed some small pieces with it, and it yields reasonable results so far, though I'm sure there's still room for improvement.

    It includes some G-Code to mitigate some ooze from the nozzle that occurs during auto-level and prime the nozzle for the skirt or raft. Don't be surprised to see the nozzle move off to one side of the platform if you use the profile. The idea for this came from here: http://hydraraptor.blogspot.com/2012/04/ooze-free-unattended-start.html
     

    Attached Files:

  5. Ian Brennan

    Ian Brennan Member

    Joined:
    Mar 15, 2014
    Messages:
    81
    Likes Received:
    17
    Hi. Hiw are you going with this software? Im curious to try it out if it works well
     
  6. mmgarcia30

    mmgarcia30 New Member

    Joined:
    Mar 25, 2017
    Messages:
    1
    Likes Received:
    0
    Thanks for sharing that profile for deltas.
     
Loading...

Share This Page